Road traffic is an important part of building model, different types of roads in building models will also be different.Even in the same building model, may also exist several types of roads.Below model co., LTD., guangzhou szj architectural model company tell you about the method of making construction model in different road.
The method of making the building model in different types of roads:
The method of making a, railway, window screening is a commonly used material for railway.Families take not twitch screens a piece of yarn, dyed white or black, cut into small pieces in place, became a railway.If the scale is very big organic glass can be cut into thin strips, can also be cut celluloid plate production.
Second, the method of making the city road, urban road are complex, and there must be a way to the main road, road, street, etc., so should not be the same in the said method, the following introduce several kinds of representation.
1) the trunk, time GanDao Road: will be 0.5 mm thick white cut into strips under 1 mm wide celluloid stuck on the road, give a person a sense of curbing line.
2) street lane: with flocking paper or thin organic glass cushion will not be part of the road, so the difference between the natural produce held high.Road edge was clearly displayed.
3) use instant messaging to post on the edge of stone line cut into thin strips, arc part with white gouache.
4) all with white gouache line streets and lanes.
Three, the method of making the country roads: rural road available 60 ~ 100 yellow sand paper cut into the shape of according to the drawing.In the bottom of the stage stick to pay attention to the joint of sandpaper, good to cement to prevent cocking.Had better use transparent tape on the back will be joint with tape and then stick the end stage, so as to guarantee the joint part is not crack, not tilted.
